Please Ask About Special Specifications
Do you need a customized design?
We offer several variations to meet specific size and configuration requirements.
JR3000 Series
Desktop Robot JR3000 Series
Depaneling Robot
We've added a spindle motor to the JR3000 Series to create a router-type PC board cutting robot.
Two methods for collecting cutting dust, a topside method, and an underside method.
Main Specifications
*Scroll Horizontally
| JR3203ERT | JR3303ERT(JR3303EBV) | JR3403ERT | JR3503ERT*5 | JR3603ERT*5 | ||
|---|---|---|---|---|---|---|
| Depaneling Range Limit | X,Y Axes | 195×190mm | 295×315mm | 395×395mm | 505×505mm | 505×615mm |
| Z Axes | 35mm | 90mm*6 | 82mm | 95mm | 95mm | |
| Max. PTP Speed*1 | X,Y Axes | 700mm/s | 900mm/s (800mm/s) |
900mm/s | ||
| Z Axes | 250mm/sec | 400mm/s | ||||
| Max. CP Speed*1 | XYZ Combined | 600mm/s | 850mm/s | |||
| Cutting Trajectory Precision | 0.2mm(nominal standard) | |||||
| Repeatability*2 | X Axes | ±0.006mm | ±0.007mm | ±0.008mm | ±0.008mm | |
| Y Axes | ±0.01mm | |||||
| Z Axes | ±0.008mm | |||||
| Applicable Board Materials | Glass Epoxy, Paper Phenol, etc. (maximum board thickness 1.6mm) | |||||
| Power Source | AC100～120V±10% / AC200～240V±10% （single phase） | |||||
| Power Consumption | 250W | |||||
| Supplied Air Pressure*3 | 0.5～1.0Mpa (5～10kgf/cm²) *Dry Air | |||||
| Air Consumption Volume*4 | 200Nℓ/min or more | |||||
| Spindle Motor | Rated Rotating Speed:40,000r/min | |||||
- ＊1 Maximum speed can vary depending upon conditions.
- ＊2 Repeatability was measured at a constant temperature for the robot unit only and does not represent a guarantee of absolute precision.
- ＊3 Be sure to use dry air. Supplying air containing moisture or oil can damage the device.
- ＊4 If the air volume is low, the vacuum will lose pressure, thereby reducing its dust collection efficiency.
- ＊5 The safety cover is optional for the JR3503ERT . Also, the JR3603 does not come with a safety cover. Please prepare a safety cover at the user side.
- ＊6 The workpiece mounting height is fixed with the JR3303EBV, therefore the Z-Axis moving range is not set.
- Please contact us regarding CE declarations for EU compliance.
- Specifications may be modified without prior notice to improve product quality.
Test and Try
Test your process on our machines. Please contact us for more information.